![]() Though there is a good deal of space in the top of the chassis, some coolers may be limited to single fan configuration, depending on the size of your motherboard. ![]() The mounting location in the front of the chassis can easily support radiators and all-in-one coolers sandwiched between fans in a push-pull configuration. Radiators and all-in-one liquid coolers up to 360mm can be mounted inside the main compartment of the chassis. But these locations are ideal for mounting radiators for water-cooled graphics cards. It should be taken into account that even though most all-in-one coolers can be physically mounted in the front of this chassis, because of the fixed length of the tubing, some coolers might not be able to reach the CPU socket. There is a total of 31.75mm clearance for radiators and coolers in the space above the motherboard and an additional 25.5mm for fans to be mounted above the slide-out bracket. The mounting locations in the front of the chassis supports radiators and liquid coolers up to 360mm. Radiators and all-in-one coolers can be mounted in the top, front, and rear of this chassis. In total, this chassis can be equipped with up to nine 120/140mm fans. The almost parallel placement of the fans coupled with an unobstructed flow path, allows the cool outside air to move from the front of the case to the rear exhaust fan with very little resistance. Because of the size and placement of these fans, airflow in this chassis is extremely efficient. CoolingĪs previously mentioned, the Dark Base 700 comes with a large SilentWings 3 140mm intake fan that feeds another SilentWings 3 140mm exhaust fan in the rear of the chassis over the CPU socket area. The entire process of flipping the motherboard and moving components requires less than 30 minutes if you know your way around a computer. The rubber-coated locating pins are slotted so that, using only a standard screwdriver, they can be relocated to the other side of the chassis. The motherboard tray in this chassis can be re-positioned so that your system components are inverted and accessible from the right hand side of the chassis instead of the left hand side. Now that we have detailed this chassis tech specs, we wanted to talk about one other nice customization feature.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |